To set up your iBlue Immobilizer with your phone, you’ll need a device that has Bluetooth 4.0 support. Click here to check for compatibility.

You can start the setup process once your device has been successfully installed by a qualified installer.

1. Download the app

You can download the latest version for free from the Apple App Store, Google Play or Windows Store. Once downloaded, start the application.

2. Start the setup process

Start the setup process by tapping the Skip or Get Started buttons
If you already have a vehicle registered in your app, tap the + button in the top right corner to start the setup process

3. Turn on the ignition (or push start button)

Turn the key as far as possible without starting your engine. The dashboard lights should come on when the key is in this position.If you don’t have a key and your vehicle has a push to start function, then push the start button without holding the brake. The dashboard lights should come on, but your engine should not be running.

4. Search for your device

Once you turn on the ignition, the iBlue Immobilizer device is powered on and the application will automatically search for your device. During search, make sure your Bluetooth is turned on, as this is how your phone communicates with your iBlue device. Learn more about Bluetooth here. Search may take up to 30 seconds. If you couldn’t connect with the device in 30 seconds, switch the ignition off and back on, and try connecting again.When the app finds your device, it will proceed to step 5 automatically.

There are no search results. What should I do?

5. Pair your device

If this is the first time setting up this iBlue Immobilizer device
Use your phone to scan the QR code on the PUK code card of your iBlue Immobilizer. You can find the card in the box and scratch off the coating from the gray area.
If your phone’s camera can’t successfully scan the QR code, tap “Enter the code manually” and you can enter in the alphanumeric code from the PUK card.